Tuesday, February 17, 2015

Early 1950s Nelco Sewing Machine

My Nelco badged vintage sewing machine from Japan.

Sometimes, importers and distributors selling identical models all built by Japanese factories offered several choices of brand names.  It was up to the dealers to choose between 2 or 3 brand name plates sent along in product envelopes.

I inquired about casting numbers underneath the bed,  but only one number was a significant clue--the one number under the lip said JA-13 indicating KOYO was the manufacturer in Japan.  My Nelco is model 1603, serial number 0070.  

She runs beautifully.  I'm calling her "Miss America."

When I bought her at a thrift shop, she was covered with an orange-y ear wax consistency of kitchen grease inside and out.  It took warm water, a bit of Murphy's oil soap, soft cloths, soft toothbrush, cotton swabs, and round toothpicks to gently remove the sticky film.  

The internal cleaning/oiling took some time to accomplish.  Supervised by my husband Jon, he enjoyed showing me areas that required more cleaning, and single drops of oil in each of the moving parts.

I let the oil sit for 24 hours.  The following day, I did short test runs.  Eeeeee--I wasn't expecting the machine to run so noisy at first, but I'd been advised to let her run for at least 5 minutes steady.  As I continued to run the machine for longer and longer periods I wasn't worried any more--the oil was getting distributed throughout the machine and sounding smooth.  I am really impressed how great it is running now.  

I tested the upper tension many times, but always ended up with intermittent loops forming underneath.  I turned the bobbin case screw clockwise 1/2 turn from 12 o'clock position to 6 o'clock position to adjust the lower tension.  The stitches are looking great now.  

Tags indicate my machine was likely imported by Nick Tacony who was still operating as Western Distributors, Inc. of St. Louis, Missouri before he changed the company name to Tacony.  Tacony Corporation makes the modern Babylock sewing, serging, and embroidery machines. 

My machine has conflicting badges/tags.  Both Nick Tacony and Leon Jolson were both importers of Japanese manufactured sewing machines.  Jolson started his own sewing machine company/brand name Nelco.  I am puzzled how or why my machine could have both Nelco (Jolson) and Western Sewing Machine Dist. Inc. (Tacony) labels.   

Interesting history of Leon Jolson--a Polish immigrant to the U.S. in 1947--arrived penniless, but eventually developed a distributor deal with Necchi an Italian sewing machine company, and then another similar business deal with Elna, Tavaro Geneva Switzerland.  Both of those relationships dissolved unhappily, as Leon Jolson crossed the line so to speak, creating his own company NELCO derived from the letters NE from Necchi, L as in sounding like Elna, and Co.  This infruated Necchi and Elna.

Jolson was able to keep his company name NELCO after a legal suit settled out of court.  But bold Jolson continued to advertise to his dealers using every angle to mix together the names Nelco, Necchi and Elna, finest makers of sewing machines. 

Later on, rivals Elna and Nelco imported identical machines from a Japanese manufacturer. The problem was Jolson named his identical machine Nelco Prima Vera after Elna had already named their machine Elna Primula.  Elna sued Nelco.

Thursday, February 5, 2015

1916 Singer Hand Crank Sewing Machine

Side Board in the Red Dining Room

On the dining room side board is a stack of neutral fabrics and a 1916 Singer Hand Crank and Case that I purchased from First Street Antiques in Ishpeming, Michigan, owner Bill Carter.  

I first became interested in hand crank machines when my friend Jerry Johnson demonstrated his 1932 Singer model 99 at summer/fall events.  Everyone who stopped in at Jerry's booth watched him sew, joining strips of fabric  to form 2 lb. balls to loom his great rugs.  Jerry's rugs are fabulous.

1916 Singer Hand Crank Model identification:  
The serial number plate G4595778 is located on the right hand side of the machine bed.

There are no model numbers on these early Singer machines.  However, by answering  a series of questions, it is possible to identify the model quickly and accurately.  

Question 1: Electric or people powered?  - Answer: people power by hand crank

Flywheel and Hand Crank

Question 2: Drop in Bobbin, or Vibrating Shuttle?  - Answer: Vibrating Shuttle.
Vibrating Shuttle (bullet shaped shuttle) holds bar-bell shaped wound bobbin
Look at the beautiful gold decals.  Antique and Vintage Singer sewing machines and other brands featured beautiful painted and decal designs.  My 1916 machine decal pattern is "Victorian."

Question 3: Location of  bobbin winding mechanism: top right.

Bobbin Winder

Engraved End Plate is Flat with Rounded Edges

Question 4 - Comparing style of end plate - mine is a decorative engraved flat end plate with rounded edges. 

Question 5 - what is the machine bed width?  Answer:  12-5/32" wide.  

From these answers--my 1916 Singer Hand Crank Sewing Machine is a Model 128.  It is a 3/4 size machine.  

Note: Model 127 machines have a bigger machine bed width, 14-15" wide.

Singer Manufacturing Co. Logo on the case
1916 Singer Model 128, Hand Crank Sewing Machine

For fun, I put some quilt blocks on the machine--to photograph.
(a quilt I'm working on today)

First Street Antiques owner Bill Carter included an extra vibrating shuttle, and this little container of  Boye Needles.

Rolling the container- more information

Thanks for taking  look at my new machine.  
I plan to take it with me when I do shows this summer to demonstrate.